Class for working with primitive mesh which represents like lather prim. More...

#include <SCubPrim.h>

Public Types
enum	Mode
	Operations with meshes. More...

Public Member Functions
ltpm_t *	ltpm_ptr () const
	Converts the pointer to base class to a pointer to this class. More...

void	cuEditPoints ()
	Edits the points. More...

void	cuSaveCurve ()
	Saves the curve profile. More...

void	cuLoadCurve ()
	Loads the curve profile. More...

void	cuReset ()
	Reset the curve profile. More...

int	SetPoint (int id, float x, float y, int state)
	Sets the point on the curve. More...

LathePrim &	LatheType (const int &t)
	Sets the lathe type (0-cylinder, 1-cube). More...

int	LatheType () const
	Gets the lathe type (0-cylinder, 1-cube). More...

cbpm_t *	cbpm_ptr () const
	Converts the pointer to base class to a pointer to this class. More...

bool	useFillet () const
	Gets the use fillet flag. More...

LathePrim &	useFillet (const bool &b)
	Sets the use fillet flag. More...

LathePrim &	filletRadius (const float &r)
	Sets the fillet radius. More...

float	filletRadius () const
	Gets the fillet radius. More...

LathePrim &	filletRadiusRelation (const float &r)
	Sets the fillet relative radius. More...

float	filletRadiusRelation () const
	Gets the fillet relative radius. More...

gpm_t *	gpm_ptr () const
	Converts the pointer to base class to a pointer to this class. More...

void	ShowAxisDirection () const
	Shows the axis direction. More...

void	HideAxisDirection () const
	Hides the axis direction. More...

virtual LathePrim &	ResetSize ()
	Reset size. More...

virtual LathePrim &	ResetAxis ()
	Reset axis. More...

virtual LathePrim &	Position (const Vec3 &pos)
	Setter for Position. More...

virtual Vec3	Position () const
	Getter for Position. More...

LathePrim &	Size (const Vec3 &pos)
	Setter for Size. More...

Vec3	Size () const
	Getter for Size. More...

LathePrim &	SideA (const float &a)
	Setter for Side X. More...

float	SideA () const
	Getter for Side X. More...

LathePrim &	SideB (const float &b)
	Setter for Side Y. More...

float	SideB () const
	Getter for Side Y. More...

LathePrim &	SideC (const float &c)
	Setter for Side C. More...

float	SideC () const
	Getter for Side C. More...

LathePrim &	AxisX (const Vec3 &ax)
	Setter for Axis X. More...

Vec3	AxisX () const
	Getter for Axis X. More...

LathePrim &	AxisY (const Vec3 &ay)
	Setter for Axis Y. More...

Vec3	AxisY () const
	Getter for Axis Y. More...

LathePrim &	AxisZ (const Vec3 &az)
	Setter for Axis Z. More...

Vec3	AxisZ () const
	Getter for Axis Z. More...

Detailed Description

Class for working with primitive mesh which represents like lather prim.

See Also: LathePrim for notes.

Since: 5.0.0

Inheritance diagram for coat::scripto::LathePrim:

Member Enumeration Documentation

enum coat::scripto::BasePrim::Mode

stronginherited

Operations with meshes.

Member Function Documentation

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::AxisX ( const Vec3 & ax )

inlineinherited

Setter for Axis X.

Vec3 coat::scripto::IRegularGizmo< LathePrim >::AxisX ( ) const

inlineinherited

Getter for Axis X.

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::AxisY ( const Vec3 & ay )

inlineinherited

Setter for Axis Y.

Vec3 coat::scripto::IRegularGizmo< LathePrim >::AxisY ( ) const

inlineinherited

Getter for Axis Y.

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::AxisZ ( const Vec3 & az )

inlineinherited

Setter for Axis Z.

Vec3 coat::scripto::IRegularGizmo< LathePrim >::AxisZ ( ) const

inlineinherited

Getter for Axis Z.

cbpm_t* coat::scripto::ICubPrim< LathePrim >::cbpm_ptr ( ) const

inlineinherited

Converts the pointer to base class to a pointer to this class.

void coat::scripto::LathePrim::cuEditPoints ( )

inline

Edits the points.

References ltpm_ptr().

void coat::scripto::LathePrim::cuLoadCurve ( )

inline

Loads the curve profile.

References ltpm_ptr().

void coat::scripto::LathePrim::cuReset ( )

inline

Reset the curve profile.

References ltpm_ptr().

void coat::scripto::LathePrim::cuSaveCurve ( )

inline

Saves the curve profile.

References ltpm_ptr().

LathePrim & coat::scripto::ICubPrim< LathePrim >::filletRadius ( const float & r )

inlineinherited

Sets the fillet radius.

float coat::scripto::ICubPrim< LathePrim >::filletRadius ( ) const

inlineinherited

Gets the fillet radius.

LathePrim & coat::scripto::ICubPrim< LathePrim >::filletRadiusRelation ( const float & r )

inlineinherited

Sets the fillet relative radius.

float coat::scripto::ICubPrim< LathePrim >::filletRadiusRelation ( ) const

inlineinherited

Gets the fillet relative radius.

gpm_t* coat::scripto::IRegularGizmo< LathePrim >::gpm_ptr ( ) const

inlineinherited

Converts the pointer to base class to a pointer to this class.

void coat::scripto::IRegularGizmo< LathePrim >::HideAxisDirection ( ) const

inlineinherited

Hides the axis direction.

LathePrim& coat::scripto::LathePrim::LatheType ( const int & t )

inline

Sets the lathe type (0-cylinder, 1-cube).

References LatheType(), and ltpm_ptr().

Referenced by LatheType().

int coat::scripto::LathePrim::LatheType ( ) const

inline

Gets the lathe type (0-cylinder, 1-cube).

References LatheType(), and ltpm_ptr().

ltpm_t* coat::scripto::LathePrim::ltpm_ptr ( ) const

inline

Converts the pointer to base class to a pointer to this class.

Referenced by cuEditPoints(), cuLoadCurve(), cuReset(), cuSaveCurve(), LatheType(), and SetPoint().

virtual LathePrim & coat::scripto::IRegularGizmo< LathePrim >::Position ( const Vec3 & pos )

inlinevirtualinherited

Setter for Position.

virtual Vec3 coat::scripto::IRegularGizmo< LathePrim >::Position ( ) const

inlinevirtualinherited

Getter for Position.

virtual LathePrim & coat::scripto::IRegularGizmo< LathePrim >::ResetAxis ( )

inlinevirtualinherited

Reset axis.

virtual LathePrim & coat::scripto::IRegularGizmo< LathePrim >::ResetSize ( )

inlinevirtualinherited

Reset size.

int coat::scripto::LathePrim::SetPoint	(	int	id,
		float	x,
		float	y,
		int	state
	)

inline

Sets the point on the curve.

Parameters

id	index point
x	X-position
y	Y-position
state	The state of point (0-bezier, 1 - beta, 2 - sharp, 3 - fixed, 4-fixed x, 5-fixed y)

Returns: Returns the index of the set point

References ltpm_ptr().

void coat::scripto::IRegularGizmo< LathePrim >::ShowAxisDirection ( ) const

inlineinherited

Shows the axis direction.

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::SideA ( const float & a )

inlineinherited

Setter for Side X.

float coat::scripto::IRegularGizmo< LathePrim >::SideA ( ) const

inlineinherited

Getter for Side X.

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::SideB ( const float & b )

inlineinherited

Setter for Side Y.

float coat::scripto::IRegularGizmo< LathePrim >::SideB ( ) const

inlineinherited

Getter for Side Y.

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::SideC ( const float & c )

inlineinherited

Setter for Side C.

float coat::scripto::IRegularGizmo< LathePrim >::SideC ( ) const

inlineinherited

Getter for Side C.

LathePrim & coat::scripto::IRegularGizmo< LathePrim >::Size ( const Vec3 & pos )

inlineinherited

Setter for Size.

Vec3 coat::scripto::IRegularGizmo< LathePrim >::Size ( ) const

inlineinherited

Getter for Size.

bool coat::scripto::ICubPrim< LathePrim >::useFillet ( ) const

inlineinherited

Gets the use fillet flag.

LathePrim & coat::scripto::ICubPrim< LathePrim >::useFillet ( const bool & b )

inlineinherited

Sets the use fillet flag.

The documentation for this class was generated from the following file:

3d-coat/3D-CoatV4/3D-Coat/Scripto/SCubPrim.h

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation