Ngwa 3D maka mbipụta 3D

Kedu ihe bụ 3DCoat Print ? Dabere na 3DCoat, 3DCoat Print bụ ngwa nbipute 3D nke ụlọ ọrụ Pilgway mepụtara maka imepụta ngwa ngwa na ngwa ngwa nke ụdị 3D dị njikere. N'ikwu ya n'ụzọ ọzọ, ọ bụ ngwa nlegharị anya 3D maka mbipụta 3D.

Na mmemme a ị nwere ike ịmepụta ngwa ngwa ụdị maka mbipụta 3D. Ekele maka teknụzụ ihe ngosi nke voxel, ị nwere ike ịrụ ọrụ n'echeghị oke banyere nkọwa teknụzụ. Ị nwekwara ike ịkwadebe ihe nlereanya maka mbipụta.

N'okpuru ebe ị nwere ike ịhụ ngwa si interface. Ị nwere ike hazie windo niile dị ka ịchọrọ.

Lelee akụkọ anyị ka esi emepụta ụdị. N'ebe ahụ, anyị na-akọwa ọrụ na ike nke ngwaọrụ ihe ngosi n'ụzọ zuru ezu karị.

Yabụ, kedu ihe na-eme 3DCoat Print pụrụ iche na sọftụ 3D ndị ọzọ maka ndị nbipute 3D:

- Minimalistic na interface enyi na enyi.

- Ngwa niile dị n'otu nke ngwaọrụ dị mkpa iji rụzuo ọrụ ahụ.

- Ị nwere ike import ihe nlereanya gị site na mmemme ọ bụla ọzọ wee dịrị njikere maka mbipụta.

- Ngwa export pụrụ iche ga-enyere gị aka igbochi nsogbu mbipụta 3D na-adịkarị.

Ya mere, usoro ọrụ mmemme ahụ dị mfe. Na mpio mmalite, họrọ workpiece ọ bụla maka ọrụ dị ka ịchọrọ:

"Mgbanwe na Voxels" ma ọ bụ "Modeling in Surface Approach" ma ọ bụ "Setup Printing Area" na ndị ọzọ.

Mgbe ahụ mepụta ihe nlereanya, export ya.

Enwere naanị ihe mgbochi abụọ bụ isi na-etinye n'oge export: a na-ebelata ụdị a ka ọ bụrụ triangles 40K kacha elu yana ntupu ahụ na-edozi ya kpọmkwem maka mbipụta 3D.

Ma n'ebe ahụ, ị nwere njikere maka mbipụta!

Buru n'uche! Kpachara anya! Ịdọ aka ná ntị ahụike! Na-ekpo ọkụ ABS plastic (Acrylonitrile butadiene styrene) n'oge extrusion na mbipụta 3D na-emepụta uzuzu nke butadiene na-egbu egbu nke bụ carcinogen mmadụ (EPA nkewa). Ọ bụ ya mere anyị ji akwado iji PLA bioplastic emepụtara na ọka ma ọ bụ dextrose.

Ndị na-ebi akwụkwọ SLA na-eji resin na-egbu egbu ma nwee laser ultraviolet nke na-emerụ anya. Zere ilele ngwa nbipute na-agba ọsọ ma ọ bụ jiri akwa kpuchie ya.

Yiri gloves nchebe / akwa / ugogbe anya / ihe mkpuchi ma jiri ezigbo ikuku ventilashị na ngwa nbipute 3D ọ bụla. Zenarị ịnọ n'otu ọnụ ụlọ yana ngwa nbipute na-arụ ọrụ.

Enwere ike iji mmemme ahụ maka ebumnuche ọ bụla, ma ọkachamara na onye na-amu amu.

Ngwa ndị dị na mmemme ahụ ga-enye gị ohere ịmepụta ụdị maka ebumnuche dị iche iche:

- Teknụzụ

- Egwuregwu ụmụaka

- kichin

Na ndị ọzọ...

Lelee nkuzi vidiyo anyị ka ị mụta ngwa ngwa ka esi arụ ọrụ na ịmepụta ụdị. N'ebe a, anyị ga-akọwapụta ụkpụrụ izugbe nke 3DCoat Print ma ị nwere ike iji ọrụ ya tụnyere ngwa nbipụta 3D ndị ọzọ.