3DCoatScripting  4.8.31Ξ²
Π‘ ΠΏΠΎΠΌΠΎΡ‰ΡŒΡŽ скриптинга ΠΌΠΎΠΆΠ½ΠΎ ΡƒΠΏΡ€Π°Π²Π»ΡΡ‚ΡŒ возмоТностями ΠšΠΎΡƒΡ‚Π° ΠΈ Ρ€Π°ΡΡˆΠΈΡ€ΡΡ‚ΡŒ Π΅Π³ΠΎ Ρ„ΡƒΠ½ΠΊΡ†ΠΈΠΎΠ½Π°Π».
πŸŒ€ Π‘ΠΎΠ·Π΄Π°Π½ΠΈΠ΅ своих Π΄ΠΈΠ°Π»ΠΎΠ³ΠΎΠ²

3DCoat ΠΏΠΎΠ΄Π΄Π΅Ρ€ΠΆΠΈΠ²Π°Π΅Ρ‚ построСниС Π΄ΠΈΠ°Π»ΠΎΠ³ΠΎΠ²Ρ‹Ρ… ΠΎΠΊΠΎΠ½ для Ρ‚Π²ΠΎΠ΅Π³ΠΎ скрипта. МоТСшь Π²Ρ‹Π²ΠΎΠ΄ΠΈΡ‚ΡŒ Π² Π½ΠΈΡ… свой тСкст ΠΈ Π·Π°ΠΏΡ€Π°ΡˆΠΈΠ²Π°Ρ‚ΡŒ ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€Ρ‹, дСлая Ρ‚. ΠΎ. свой скрипт Π±ΠΎΠ»Π΅Π΅ Π³ΠΈΠ±ΠΊΠΈΠΌ.

НапримСр, построим... Ρ€ΠΎΠ³, запросив ΠΏΡ€Π΅Π΄Π²Π°Ρ€ΠΈΡ‚Π΅Π»ΡŒΠ½ΠΎ ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€Ρ‹ Ρƒ Ρ…ΡƒΠ΄ΠΎΠΆΠ½ΠΈΠΊΠ° Π² Π΄ΠΈΠ°Π»ΠΎΠ³ΠΎΠ²ΠΎΠΌ ΠΎΠΊΠ½Π΅.

void main() {
// ΠΏΠΎΠ΄Π³ΠΎΡ‚Π°Π²Π»ΠΈΠ²Π°Π΅ΠΌ сцСну
SculptRoom room;
room.clear().toSurface();
// ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€Ρ‹ ΠΏΠΎ ΡƒΠΌΠΎΠ»Ρ‡Π°Π½ΠΈΡŽ
float angle = 10.0;
int numberOfChunks = 20;
// ΠΎΠΊΠ½ΠΎ с ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€Π°ΠΌΠΈ
AddTranslation( "numberOfChunks", "Number of chunks in horn" );
AddIntInput( "numberOfChunks", true );
AddTranslation( "angle", "Angle" );
AddFloatInput( "angle", true );
bool ok = ModalDialogOkCancel( "Enter the horn parameters", "Create horn" );
if ( !ok ) {
// ΠΏΡ€Π΅ΠΊΡ€Π°Ρ‰Π°Π΅ΠΌ Π²Ρ‹ΠΏΠΎΠ»Π½Π΅Π½ΠΈΠ΅ скрипта
return;
}
// строим Ρ„ΠΈΠ³ΡƒΡ€Ρƒ с Π·Π°Π΄Π°Π½Π½Ρ‹ΠΌΠΈ Π²Ρ‹ΡˆΠ΅ ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€Π°ΠΌΠΈ
ResetPrimTransform();
PrimDensity( 0.3 );
for ( int i = 0; i < numberOfChunks; i++ ) {
capsule( -15, 0, 0, 15, 0, 0, 20, 20, 0 );
PrimRotateY( 0, 0, 0, angle );
PrimRotateX( 0, 0, 0, angle );
PrimTranslate( 0, 15, 0 );
PrimScaleAt( 10, 20, 30, 0.9, 0.9, 0.9 );
ProgressBar( "Please wait", (i * 100) / numberOfChunks );
}
}

Π—Π΄Π΅ΡΡŒ Π½Π΅ Π±ΡƒΠ΄Π΅Ρ‚ ΠΊΠ°Ρ€Ρ‚ΠΈΠ½ΠΊΠΈ, Ρ‡Ρ‚ΠΎΠ±Ρ‹ Ρ‚Ρ‹ Π·Π°Ρ…ΠΎΡ‚Π΅Π» сам Π·Π°ΠΏΡƒΡΡ‚ΠΈΡ‚ΡŒ этот ΠΏΡ€ΠΈΠΌΠ΅Ρ€ Π² 3DCoat.

ΠŸΠΎΡΠΌΠΎΡ‚Ρ€ΠΈ Ρ‚Π°ΠΊΠΆΠ΅ этот Π½Π°Π±ΠΎΡ€ Ρ„ΡƒΠ½ΠΊΡ†ΠΈΠΉ для ΠΏΠΎΠ»Π½ΠΎΠΉ ΠΊΠ°Ρ€Ρ‚ΠΈΠ½Ρ‹ возмоТностСй:

// Returns whole command line.
string getCommandLine();
// Stores some string as global value that may be read later in
// the session. The value will be stored in 3B file and you will
// be able to read in further work with this scene.
DEPRECATED void SetGlobalVar(string& Name,string& Value)
// Returns value previously stored using SetGlobalVar.
DEPRECATED string GetGlobalVar (string& Name)
// Returns scene filename (last saved or opened as 3B file).
DEPRECATED string GetSceneFileName()
// Sets scene filename for further saving.
DEPRECATED void SetSceneFileName(string& Name)
// Highlight element with red rectangle.
// Pass the `time` in seconds.
void HighlightUIElement(string &ID, float time);
// Goes to one of previous dialogs in call stack.
DEPRECATED void back(int steps=1);
// Opens window described by xml-file pointed by Path.
// If Path contains .3b file will be opened as 3B file.
DEPRECATED void open(string &Path);
// Opens model for PPP, if path is empty, shows open dialog.
DEPRECATED void ppp(string &path);
// Opens model for MV painting, if path is empty, shows open dialog.
DEPRECATED void mv(string &path);
// Opens model for Ptex, if path is empty, shows open dialog.
DEPRECATED void ptex(string &path);
// Import image as mesh, dialog will be shown.
DEPRECATED void imagemesh();
// Import mesh as reference, if path is empty dialog will be shown.
DEPRECATED void refmesh(string &path);
// Import mesh for vertex painting, if path is empty dialog will be shown.
DEPRECATED void vertexpaint(string &path);
// Perform autopo over the mesh chosen in dialog.
DEPRECATED void autopo(string &path);
// Opens mesh for repairing. If id contains "vox" then model will be
// voxelized, if there is substring "shell" then mesh will be imported
// as thin shell. Mesh Opening dialog will be shown.
DEPRECATED void repair(string &id);
// Activate bas-relief tool.
DEPRECATED void bass();
// Activale remove undercuts mode.
DEPRECATED void undercut();
// Activate special voxel tool. id may be found in English.xml between
// <ID>...</ID> if you will find name of tool between
// <Text>...</Text> tags.
DEPRECATED void activate(string &id);
// Activate retopo tool.
DEPRECATED void retopo();
// Open mesh using dialog and merge as retopo mesh.
DEPRECATED void retopopen();
// Activate any room - name is one of "Paint", "Tweak", "UV",
// "Voxels", "Retopo", "Render".
DEPRECATED void ToRoom(string &name);
// Check if you are in specified room - name is one of "Paint",
// "Tweak", "UV", "Voxels", "Retopo", "Render".
DEPRECATED bool IsInRoom(string &name);
// Add new volume in voxel room. If name is empty name will be
// assigned automatically.
DEPRECATED void AddNewVolume(string &name);
// Activate UV room.
DEPRECATED void uv();
// Activate voxel room and add new volume.
DEPRECATED void vox();
// Create sphere of radius R in voxel room in current object.
// \param mode 0 - add, 1 - subtract, 2 - intersect with scene.
DEPRECATED void sphere(float x,float y,float z,float r,int mode);
// Create cube in voxel room in current object.
// \param mode 0 - add, 1 - subtract, 2 - intersect with scene.
// \param sizex Size by X-axis.
// \param sizey Size by Y-axis.
// \param sizez Size by Z-axis.
DEPRECATED void cube(float x,float y,float z,float sizex,float sizey,float sizez,int mode);
// Turn all volumes to surface mode.
DEPRECATED void surf();
// Turn current volume to the surface mode.
DEPRECATED void cursurf();
// Turn current volume to voxel mode, voxelize if need.
DEPRECATED void voxelize();
// Sets merging options in voxel room. opt is just set of substrings
// with different options. Possible values are:
// [voxelize=true]
// [voxelize=false]
// [separate=true]
// [separate=false]
// [respectneg=true]
// [respectneg=false]
// [as_skin=true]
// [as_skin=false]
// [skin=....] - to set skin thickness.
DEPRECATED void mergeopt(string &opt);
// Example:
mergeopt( "[voxelize=true][as_skin=true][skin=4.5]" );
// Merge model in voxel room. Empty string means that dialog will be shown.
DEPRECATED void merge(string &model);
// Activate voxel primitives tool. Possible primitives:
// cube, cylinder, sphere, tube, cone, ellipse, n-gon, gear.
DEPRECATED void prim(string &id);
// Apply in current tool (same as press enter).
DEPRECATED void apply();
// Apply in Merge tool without asking "Keep scale?".
// Scale will not be kept and scene scale will not be changed.
DEPRECATED void ApplyAndKeepScale();
// Apply in current tool (same as press enter) wint one difference -
// in Merge tool scale of merged object sill be automatically kept and
// scene scale changed if this merge is first.
DEPRECATED void mapply();
// Open recent 3B-file.
DEPRECATED void recent3b();
// Print text to MyDocuments/3D-CoatV4/log.txt.
DEPRECATED void Log(string &line);
// Generate integer random number min..max.
int rand(int min,int max);
// Generate floating random number min..max.
float randF(float min,float max);
// Set random generator seed.
void seed(int val);
// Show progress bar pos = 0..100.
DEPRECATED void ProgressBar(const string& message,int pos);
// Set orthogonal (true) or perspective (false) view mode.
DEPRECATED void SetOrthoMode(bool value);
Π‘ΠΌ. Ρ‚Π°ΠΊΠΆΠ΅
πŸŒ€ Π”ΠΈΠ°Π»ΠΎΠ³ΠΎΠ²Ρ‹Π΅ ΠΎΠΊΠ½Π°